Switch question
Switch question Well kind of a switch question. I have 2 rocker switches that have 3 prongs on them each. A ground, a power and I believe a ACC or something similar to that. I already grounded a line from both of the switches. My question is, I have a purge kit from n.o.s. I connect one line from the switch to the purge noid. It says on the purge instructions im suppost to connect the other line from the purge switch to my purge arming switch. Would I connect it to the power or the "acc" prong? Thanks
the solenoid would connect to the acc. the + wire from the power source would connect to the power terminal. if you had the wires crossed it would still work but the light in the switch would stay on all the time.
THe diagram shows me as grounding a switch from the noid and connecting a wire to the switch then the other prong to my purge arming switch. Nowhere on there does it show me goin to a power terminal at all, thats why im confused.
On the switch
Accessory- to your purge noid, the other wire on the noid goes to ground
Ground- needed only to light up the LED on your rocker
Power----switched 12 Volt
Most Purge switches are momentary push buttons, they are $3 at radio shack. The rocker will work, but be carefull not to leave it on, you will waste alot of Nitrous.
Accessory- to your purge noid, the other wire on the noid goes to ground
Ground- needed only to light up the LED on your rocker
Power----switched 12 Volt
Most Purge switches are momentary push buttons, they are $3 at radio shack. The rocker will work, but be carefull not to leave it on, you will waste alot of Nitrous.
