NX MAF kit - wiring location question
NX MAF kit - wiring location question Okay, I've got the kit mostly installed on the Formula. But I don't know where to splice into for the TPAS and Window switch (tach signal). I know where the TPS is located and it has 3 wires coming out, but I don't know which one is the output. Don't have a clue where the tach signal is for the Window Switch. I also got a NX Window Switch, I need to know the location and which wires are the Positive and Negative on the coil. Pics would be great if possible.
Also, after looking for awhile, I'm not really for sure where the fuel test port is, to connect the line. Any pointers would be appreciated guys. I will post pics when done. I will have an interesting bottle mount. Oh, before you burn me, I have looked through all the FAQs and did the search, but no help. Thanks for any help!!!
Also, after looking for awhile, I'm not really for sure where the fuel test port is, to connect the line. Any pointers would be appreciated guys. I will post pics when done. I will have an interesting bottle mount. Oh, before you burn me, I have looked through all the FAQs and did the search, but no help. Thanks for any help!!!
Last edited by turbo86; Aug 6, 2006 at 10:44 AM.
Here's your fuel line connection, right side of manifold. You need to remove the valve that's underneath the cap.
The 2 wires you need are on the bottom connector of the computer. I believe the wires are #10 white and #24blue. I can't remember which is for the TPS or the tach. Hope this helps alittle........
The 2 wires you need are on the bottom connector of the computer. I believe the wires are #10 white and #24blue. I can't remember which is for the TPS or the tach. Hope this helps alittle........
