felpro Head Gaskets and Nitrous
08-15-2006, 05:33 PM
#1
Banned
Thread Starter
iTrader: (20)
Join Date: Feb 2003
Location: Fort Rucker
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
felpro Head Gaskets and Nitrous I am wonder if thier is anyone who is using felpro head ( non mls) (non copper) gaskets and how big of a shot that your using.
08-15-2006, 07:22 PM
#3
11 Second Club
iTrader: (3)
Join Date: Feb 2004
Location: memphis, tn
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
i have ran the felpros on my car for about 2 years, i have sprayed anywhere from a 75 dry shot to a 200 dry shot on them, also had a procharger d-1 on the car for about 6 months of the time with 12psi. i am in the process of changing out my cam and replacing the lifters while i am at it, i will be going back with felpros.
08-15-2006, 09:56 PM
#4
Banned
Thread Starter
iTrader: (20)
Join Date: Feb 2003
Location: Fort Rucker
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
sounds good!
Originally Posted by BIRDONNOS
i have ran the felpros on my car for about 2 years, i have sprayed anywhere from a 75 dry shot to a 200 dry shot on them, also had a procharger d-1 on the car for about 6 months of the time with 12psi. i am in the process of changing out my cam and replacing the lifters while i am at it, i will be going back with felpros.
08-16-2006, 11:53 AM
#7
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yobabiesdaddy2001
Speaking on the paper gaskets.
Trending Topics
08-16-2006, 10:58 PM
#9
Truck addict
Join Date: Apr 2003
Location: Gautier or Pascagoula, MS
Posts: 6,559
Likes: 0
Received 0 Likes
on
0 Posts
i currently have the fel pro gaskets on my truck and have sprayed a 200 shot several times and i spray a 150 on a normal basis. no problems. however with the new motor i have going in the truck, i went with mls gaskets. i'd rather have the steel vs the fel pro from here on out.
Last edited by goshawk23; 08-17-2006 at 07:31 PM.
08-17-2006, 08:43 PM
#12
11 Second Club
iTrader: (3)
Join Date: Feb 2004
Location: memphis, tn
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yobabiesdaddy2001
Sounds good! What head bolts did you use? What do you contribute the sucess of the gaskets too, most people say dont do it like earlier in the thread. I think I have my mind made up.
