Hello buyin N20 today
Thread Starter
Teching In
Joined: Jun 2006
Posts: 44
Likes: 0
From: Houston
Hello buyin N20 today I am goin to buy a wetkit from Dynotune and planing to run a 100shot. Do i need to get a torque converter also? If so which converter should i get that is affordable and has a good stall? plz get back to me ASAP i want to order all the stuff 2night so i can get it by next week sometime. 
You will need a window switch to control the rpm band in which the nitrous is sprayed. Going to low of an rpm sometimes causes the fuel to puddle up and explode in your intake manifold. The stock converter can and will work fine, but a 3200-3600rpm converter would work really well on the gas. I would invest in a heater as well, youll also need a bottle gauge if the kit does not include it. There is alot to learn about nitrous but if you set it up right your motor will be fine. Check out the sticky threads at the top of this section and youll learn alot. I see your in Houston, let me know when you get that kit installed and we can run. 
Trending Topics
Thread Starter
Teching In
Joined: Jun 2006
Posts: 44
Likes: 0
From: Houston
You will need a window switch to control the rpm band in which the nitrous is sprayed. Going to low of an rpm sometimes causes the fuel to puddle up and explode in your intake manifold. The stock converter can and will work fine, but a 3200-3600rpm converter would work really well on the gas. I would invest in a heater as well, youll also need a bottle gauge if the kit does not include it. There is alot to learn about nitrous but if you set it up right your motor will be fine. Check out the sticky threads at the top of this section and youll learn alot. I see your in Houston, let me know when you get that kit installed and we can run.
Ill post some pics up 1nc we get it installed and a dyno run to