LT1 Direct Port Images
Thread Starter
Launching!
Joined: Apr 2006
Posts: 218
Likes: 0
From: Central Wisconsin
LT1 Direct Port Images When I did my research for direct port NOS LT1 I couldn't find any pics earlier this summer. After spending a few hours looking for the best solution this is what I came up with. After posting a few images of the completed 383 I have been asked a few times for images. I used a NOS Sportsman Direct Port Fogger System. After talking with NOS Tech Support they said this sytem was good for 300 HP. I was looking for 200 HP. I drilled the intake before I sent it out to be cleaned then I painted it. I used Loctite (Red) to make sure I wouldn't have any issues with vacume leaks. I am running a seperate fuel supply with a Holley Red Electric pump for the NOS. Have yet to run it due breaking the rearend breaking twice this summer. I will be running it soon because it will be getting to go on stands for a Ford 9" winter project.
Last edited by ToxicTA; Sep 19, 2006 at 10:37 PM.
Thread Starter
Launching!
Joined: Apr 2006
Posts: 218
Likes: 0
From: Central Wisconsin
Originally Posted by jldak318
what did u use to bend your lines? just a regualr tubing bender from a parts store or a NOS brand one?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
