TnT install Please Come in and Help!
TnT install Please Come in and Help! First - where is a good clean looking place to mount the Msd window switch?
Second- where is a good place to mount the relay
Third- on the tnt kit the solenoids are mounted side by side on a bracket next to the intake\throttle body..........soooooooo if i install a purge kit where does the solenoid go cause i dont think it will fit below the nitrous one?
Id appreciate your help and any pics if you have em.
Also i would like to post some pics in my profile but dont know how.. .always says file too big....how do you adjust them to fit?
thanx
jonathan-----------------katy TEXAS
Second- where is a good place to mount the relay
Third- on the tnt kit the solenoids are mounted side by side on a bracket next to the intake\throttle body..........soooooooo if i install a purge kit where does the solenoid go cause i dont think it will fit below the nitrous one?
Id appreciate your help and any pics if you have em.
Also i would like to post some pics in my profile but dont know how.. .always says file too big....how do you adjust them to fit?
thanx
jonathan-----------------katy TEXAS
TECH Regular
Joined: Feb 2003
Posts: 498
Likes: 0
From: Miami ,Fl
Originally Posted by JonSS_Tex
First - where is a good clean looking place to mount the Msd window switch?
Second- where is a good place to mount the relay
Third- on the tnt kit the solenoids are mounted side by side on a bracket next to the intake\throttle body..........soooooooo if i install a purge kit where does the solenoid go cause i dont think it will fit below the nitrous one?
Id appreciate your help and any pics if you have em.
Also i would like to post some pics in my profile but dont know how.. .always says file too big....how do you adjust them to fit?
thanx
jonathan-----------------katy TEXAS
Second- where is a good place to mount the relay
Third- on the tnt kit the solenoids are mounted side by side on a bracket next to the intake\throttle body..........soooooooo if i install a purge kit where does the solenoid go cause i dont think it will fit below the nitrous one?
Id appreciate your help and any pics if you have em.
Also i would like to post some pics in my profile but dont know how.. .always says file too big....how do you adjust them to fit?
thanx
jonathan-----------------katy TEXAS
2- under the dash where it can't be seen.
3- I'm not sure how the TNT solenoids and brackets are so I really can't tell you where to put the purge solenoid.
4- Use Windows paint to resize your pics.
If you bought the tnt purge it comes with a long alum. addapter that screws onto the bottom of the nitrous solenoid and T's off a small braided line to your purge solenoid. Well I did not use the small braided line, I screwed my purge noid directly to the alum. fitting. It fits, close to the belt, but it fits. Even with the Dynotune dry noid screwed to the other side. hehe.
Originally Posted by JonSS_Tex
Thanks for those pics and suggestions. I like both set ups for the window switch, now I just have to pick one.
FWIW, I wish I would have put my window switch in the glove box.
