Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Suggestions needed!

Old Oct 4, 2006 | 08:30 PM
  #1  
Beerman's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2005
Posts: 127
Likes: 0
Default Suggestions needed!

I need a plug that has a heat range 1-2 ranges colder then stock, and
is a non-projected tip.
I've run the AR472's, but I feel their too cold for what I need.
Just need something that is a little more forgiving while off the bottle.
Reply
Old Oct 4, 2006 | 09:12 PM
  #2  
00formLs1's Avatar
12 Second Club
 
Joined: Apr 2005
Posts: 800
Likes: 0
From: las cruces, new mexico
Default

ngk tr6 gaped at .035 i have had a set of those in my cars for around 10k miles. my idle is close to stock. i get a little surge but nothing that affects drivability.
Reply
Old Oct 5, 2006 | 03:31 PM
  #3  
Beerman's Avatar
Thread Starter
On The Tree
 
Joined: Apr 2005
Posts: 127
Likes: 0
Default

That is a projected tip plug.
I need something in that heat range that's non-projected.
Reply
Old Oct 5, 2006 | 03:39 PM
  #4  
TwoFast4Lv's Avatar
10 Second Club
20 Year Member
Photogenic
iTrader: (8)
 
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Default

I had good luck with the AR94s. I have AR93s in the car right now and I am daily driving it. sitting out side the Office right now and it was 44 Degree's when I left for work this morning.

Maybe they will work for you ?
Reply
Old Oct 5, 2006 | 09:05 PM
  #5  
Dutch SS's Avatar
On The Tree
iTrader: (3)
 
Joined: Jun 2003
Posts: 120
Likes: 1
Default

could try NGK BR7EF (stock number 3346)..... two steps colder than stock. we have run them pretty successfully with up to 250 shots
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:58 AM.