Hey guys wanted to know if any of u guys where runnig -6an line from your bottle to nos sol. Ive heard it works well. Just wanted to get some input.
Thanks

 

If you are going to be trying to do 250 plus then yes. It also depends on the length, a 5ft -4 feed line will support a lot more than a 20ft -4 feed line.

 

i agree with srsnow i run all 6 an lines it all depends on how big of a shot your going to run

 

Well the bottle is in the rear. Im runnind a 150 wet shot now, but moving up 2 a 250 in the future. Just waitin for the stand alone.

 

i would run th -6AN

 

I am running a 250rwhp shot on -4an and is about 16/18 feet long, and not running out. You must have a min/none of hard 90*'s, Tee's and other such restrictions, and I use all tube 90* (sweep 90*'s). Under absolute perfect conditions a -4an can support a 400hp shot in theroy.
Robert

 

i like to be sure and i tend to overkill so i use all 6 an and the hsw stand alone so that i know i have enough nitrous and fuel heres some pics of my setup

http://www.harrisspeedworks.com/gall...s.php?album=34

 

Yea, I am like that also, but I have about 300 feet of bulk -4 hose left over from a job at work, so being the cheapskate I am, I'll stick for now, but the 300rwhp shot I plan on doing will likely need up sizing.
Robert

 

cant wait to see whos bottom end goes first mine or yours, i love showing everyone how much abuse the stock bottom end can take good luck with the 300 shot

 

Thanks guys going to install the -6an this week. Good luck with them bottom ends.