wiring help

Reply Subscribe

Thread Tools

Search this Thread

Oct 15, 2006 | 07:33 PM

SMAX

Thread Starter

11 Second Club

iTrader: (11)

Joined: Aug 2004

Posts: 453

Likes: 0

From: TULSA

wiring help needed asap

ok i did several searches and came up with nothing. i know very little about wiring and i really want to make sure this is right. i have an activation switch, a wot switch and a mallory 628 window switch. if anyone could hook me up with a diagram it would be appreciated alot. oh yeah and i also have a relay.

Last edited by SMAX; Oct 20, 2006 at 09:53 PM.

Oct 15, 2006 | 08:17 PM

CAT3

Restricted User

iTrader: (9)

Joined: Sep 2002

Posts: 7,603

Likes: 0

From: Sierra Vista, AZ

Did you look at the stickies above, the one with wiring diagrams in it? I am sure there is one in there.

Oct 15, 2006 | 08:20 PM

CAT3

Restricted User

iTrader: (9)

Joined: Sep 2002

Posts: 7,603

Likes: 0

From: Sierra Vista, AZ

well well well, looky here
https://ls1tech.com/forums/showpost....5&postcount=20

First page, last post...kind of a nice feature that when I stickied them I included components in the description bar for easier "search" button function! Imagine that.

Oct 15, 2006 | 08:27 PM

SMAX

Thread Starter

11 Second Club

iTrader: (11)

Joined: Aug 2004

Posts: 453

Likes: 0

From: TULSA

thank you. i do appologize i even looked at that and for some reason that was for the digital mallory (if it even makes a difference). again thank you very much and i do appologize.

Oct 15, 2006 | 08:32 PM

CAT3

Restricted User

iTrader: (9)

Joined: Sep 2002

Posts: 7,603

Likes: 0

From: Sierra Vista, AZ

No problem Max...if its different than what you have, I suggest pm'ing NXRicky as he put many of them together.

Oct 15, 2006 | 08:38 PM

SMAX

Thread Starter

11 Second Club

iTrader: (11)

Joined: Aug 2004

Posts: 453

Likes: 0

From: TULSA

i am pretty sure that is the right one after comparing it to window switch manual and the kit manual. i just have a hard time picturing wiring in my head and then putting it together.

Oct 15, 2006 | 10:24 PM

CAT3

Restricted User

iTrader: (9)

Joined: Sep 2002

Posts: 7,603

Likes: 0

From: Sierra Vista, AZ

Quote:

Originally Posted by SMAX

i am pretty sure that is the right one after comparing it to window switch manual and the kit manual. i just have a hard time picturing wiring in my head and then putting it together.

I totally understand that, why else do you think I made a sticky for such a thing

I hate wiring, hate it even more when there is sketchy diagrams or instructions w/o diagrams.

Trending Topics

60-130 Dragy runs?

21

482
FI Tech engine management system.......anyone use it?

10

118
LS3 will not run

21

487
Car covers

11

671
New to me '04

18

371

Oct 20, 2006 | 09:42 PM

SMAX

Thread Starter

11 Second Club

iTrader: (11)

Joined: Aug 2004

Posts: 453

Likes: 0

From: TULSA

ok i have a problem. i have the nx pn15896 switch panel and when i click the switch to on the light is not coming on. when i check to see if there is voltage to it with the key on and the switch off there is 12 volts on pin 2 (keyed voltage), but when i flip the switch on there is no voltage. the easiest keyed 12 volt i found was the red wire that goes to where my egr valve used to be. could this be my problem? because with the switch on and the window switch set at 1500-2000rpm it doesnt appear that anything happens. also on the wiring diagram it looks like pin 30 on the relay goes to a constant 12 volt source is that correct? i really need help because i have an appointment tomorrow at 3pm to get this thing dyno tuned for the nitrous and really cant afford to miss(my tuner is coming from out of town)

PLEASE HELP!