What gear are u guys running w/28" slicks!!
#1
8 Second Club
Thread Starter
iTrader: (11)
Join Date: Jul 2005
Location: nj
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
What gear are u guys running w/28" slicks!!
Hey guys wanted to now what gear your running in yor 12 bolt with NOS.
I running 28' slick with a 3 speed auto. U think i could get away with 4.10. Right now im running 3.73, but think i broke the ring gear.
I running 28' slick with a 3 speed auto. U think i could get away with 4.10. Right now im running 3.73, but think i broke the ring gear.
#2
TECH Apprentice
iTrader: (5)
Join Date: Jun 2002
Location: Dallas, TX
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Depends on what your trap speed is, what you are turning the motor to, and how efficient your converter is...
With my old stock headed 346 setup I was running 4.10's with a TH400...very tight and efficient neal chance converter...
Crossing through the traps around 7200rpm at 142 mph...
With my old stock headed 346 setup I was running 4.10's with a TH400...very tight and efficient neal chance converter...
Crossing through the traps around 7200rpm at 142 mph...
#5
Tenured Member
iTrader: (4)
Join Date: Dec 2005
Location: PRISON CITY, IL (Joliet)
Posts: 681
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by n20stroker
Right now think im going through the traps at 6500 at 135.
The conveter is a Hughes pretty tight non lockup
The conveter is a Hughes pretty tight non lockup
I would say it would be close with that converter and a 4.10, you would need to tighten it up alittle.