Maybe done for the season
you went on the bumper, i didnt, i have run just as fast 60'
maybe you should take my tips for what there worth instead of bustin *****. but thats cool either way, its your money getting smashed.

Im not taking tips from a guy who don't know loosening shocks adds upward spring not takes it away! You went fast what 3 times and blew your **** up. Ill take advise from knowledgable guys or even guys that have good ideas. Ill leave the piston melting to you. FYI i don't plan on going 9.0 1 time and having it eat itself at the 1000' mark
tight up front less spring. my bad. its been a while since i had to adjust any suspention

Seems Mr suspention expert didn't even uderstand front shocks.
you never made a mistake
i went fast last year all season, then sold all my parts. must of done somthing right

I have been called a d1ckhead before. go back and read your reply to me and see who was the dick first. you were wrong i cvalled you on it and you blem up now your mad cause i was right again about your motor eating it self. truth hurts worse than lies right?
I have been called a d1ckhead before. go back and read your reply to me and see who was the dick first. you were wrong i cvalled you on it and you blem up now your mad cause i was right again about your motor eating it self. truth hurts worse than lies right? 
my old parts where fine. you saw mycrank right? it was fine, had about 30k miles on it, plus a pile of spray runs. whatwas wrong with it?
my rods, pistions, and block are still in use in a street/strip car
"edit-- my rods from my 346 may not be in the car. i forget now whatrods are in there. they may have been my stock rods from my turbo motor. i forget now. please dont tar andfeather menowfor making another mistake
as for my post.
"i run the glide with a 1.8 ]
i went my 9.0 with a 1.31 60 foot, and didnt even lift the tires. ]
no travle limiters" ]
i posted this because you asked who ran this setup, i do.
http://1960belair.8m.com/Videos/Noyzee.wmv
not to say i wont next year, im going to try to set my car up for big wheelies to make it fun. i will be running a 9.5 class, so i need somthing to make it interesting.
but its all in the suspention and tuneup.
that sucks tho, braking **** sucks big time.
i said this because it is true. if the suspention is set up right, you wont hit the bumper, and braking stuff does suck. i know that for a fact. my #4 pistion will tell you.
how is that being a dick?
my old parts where fine. you saw mycrank right? it was fine, had about 30k miles on it, plus a pile of spray runs. whatwas wrong with it?
my rods, pistions, and block are still in use in a street/strip car
"edit-- my rods from my 346 may not be in the car. i forget now whatrods are in there. they may have been my stock rods from my turbo motor. i forget now. please dont tar andfeather menowfor making another mistake
as for my post.
"i run the glide with a 1.8 ]
i went my 9.0 with a 1.31 60 foot, and didnt even lift the tires. ]
no travle limiters" ]
i posted this because you asked who ran this setup, i do.
http://1960belair.8m.com/Videos/Noyzee.wmv
not to say i wont next year, im going to try to set my car up for big wheelies to make it fun. i will be running a 9.5 class, so i need somthing to make it interesting.
but its all in the suspention and tuneup.
that sucks tho, braking **** sucks big time.
i said this because it is true. if the suspention is set up right, you wont hit the bumper, and braking stuff does suck. i know that for a fact. my #4 pistion will tell you.
how is that being a dick?
The Best V8 Stories One Small Block at Time
man, your to much.
good luck
he's mad his car hasnt even gone as fast as my little 346 did 2 years ago
i feel i must explain this because old post where taken the wrong way.
the above is a ball busting joke that you probably will get mad at and think im being a dick. so befor you get bent this is said as a joking ball bust.
"getting out of the hole good consists of not riding the bumper and smashing **** up.
i know it happens for sure, and in these lsx cars it is very easy"
however, i said it kidding around, but being internet, no emotions show threw, and i can see where he took offence to it.
and again im sure he is upset his car with that big motor cant run as fast as my 346.
again. above is a joke again. busting *****
Here we go 
he gets mad to easy
i melted (cracked) a pistion and i thought it was funny.
i thought it was funny my budget built 346 running 300 for 100 or so passes and coming apart mint lasted longer then my full race motor. lol
talk about weird
i guess a guy telling me to shut my mouth, hes faster ,listen to him when he was wrong is not a dick move? even after i told him politely he was wrong
good job on melting your piston noyzee. you were proud of it so i cheered you on.
I dont believe it was 2 ful years ago
If you want to run heads up put yours back togeather and we can set it up. other wise mines faster on all 8
hell ill sell you my motor and have jeff tune it and you can spray it more than 3 times i bet
Shiz isnt far behind ...9.5 on the 1st stage in only 3 or 4 passes so far... it will go a 9.0 or faster as long as we can keep it off the bumper

I say you 2 agree to diagree and let it go.
good job on melting your piston noyzee. you were proud of it so i cheered you on.
I dont believe it was 2 ful years ago
If you want to run heads up put yours back togeather and we can set it up. other wise mines faster on all 8
hell ill sell you my motor and have jeff tune it and you can spray it more than 3 times i bet 
ididnt hurt it till i hit 2 stages. good luck with yours once you hit it with 2 stages
ps, tested my injectors, and that one was 13%| lower then my lowest one. not sure, but that could do it.
atv. this is fun, i agree
still no pics from shiz, maybe he did blow it up, but it sounds cooler saying it went on the bumper then it does saying hemelted it down


That sucks, good luck with the repairs/upgrades though!