New B Question
New B Question When you activate the system do you need to hold the button down for the desired amount of time you want the spray to come out or does it just take 1 press for 100 hp to flow (if you had a 100 shot nozzle)?
Is it possable to hook it up to so you flip one switch that activates, opens bottle, and sprays it when it hits the desired preset rpm?
Sorry for the stupid AZZ questions, believe it or not I did use the search button which answerd the other 187 questions I had, could not find these answered.
TIA
Is it possable to hook it up to so you flip one switch that activates, opens bottle, and sprays it when it hits the desired preset rpm?
Sorry for the stupid AZZ questions, believe it or not I did use the search button which answerd the other 187 questions I had, could not find these answered.
TIA
6 & 8 Second Club
Joined: Aug 2006
Posts: 2,284
Likes: 0
From: Illinois, RT 66 dragway area
You can build a circuit to do just about anything with relays, timers, triggers ect.
I would never use anything but a momentary switch to trigger N2O.
I also always use a W. O. T. switch as a back up.
Good luck.
I would never use anything but a momentary switch to trigger N2O.
I also always use a W. O. T. switch as a back up.
Good luck.
I would use a wide open throttle switch and some sort of RPM activated switch like the MSD window switch. I used the MSD window switch that requires modules to turn the nirous on and off, but I have heard that the digital one is alot nicer. As far as the activation switch...I installed the nitrous outlet switch panel that fits in the ashtray and includes the purge, bottle heater and arming switch.
I dont want it to be seen so I was thinking of putting another fog light button up top (in the empty slot next to the fog light switch) and putting the activation button in the cigarett lighter spot (remove that, I dont smoke anyway).
