Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

need nitrous help badly

Old Dec 30, 2006 | 07:19 PM
  #1  
Jmac29's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2006
Posts: 50
Likes: 0
Default need nitrous help badly

I have bolt on 97 lt1 camaro with a full exhaust(headers hi-flow cats to slp loudmouth) and cold air intake, a new stock fuel pump with about 10k on it (if that matters) and thats about it, im going to order a hyptech and some gears next and all this ***** being installed later on.. i need to order a nitrous kit because im tryin to get into the 12's, i was recomended a wet 150 shot by NOS but idk if thats my best bet, and do i need new injectors to run a wet kit. Last thing is how many other supporting mods would i need to run it as safe as i could. i tried searching for as much info btw couldnt find all im lookin for.
Reply
Old Dec 30, 2006 | 08:09 PM
  #2  
FloydSummerOf68's Avatar
TECH Regular
iTrader: (1)
 
Joined: Mar 2005
Posts: 467
Likes: 0
From: Missouri City
Default

To run a wetkit your stock injectors would be fine, you would want to look at a fuel pump in the future, however.

You arent giong to want to use the hypertech with nitrous. The hypertech advances your timing and that is bad for nitrous. Nitrous needs to pull timing to avoid KR.

Accessories you would want to look for are a fuel pressure safety switch, a window switch, blow down tube, and a nitrous filter.
Reply
Old Dec 30, 2006 | 08:19 PM
  #3  
onephatZ28's Avatar
11 Second Club
iTrader: (8)
 
Joined: Dec 2005
Posts: 1,058
Likes: 0
From: Yucaipa,CA
Default

I have bolt on 97 lt1 camaro with a full exhaust(headers hi-flow cats to slp loudmouth) and cold air intake,and a150 shot of NX the car ran a 12.39@117mph.I did this with the bottle at 700psi.I would stay away from NOS, but that me

Reply
Old Dec 30, 2006 | 08:21 PM
  #4  
FloydSummerOf68's Avatar
TECH Regular
iTrader: (1)
 
Joined: Mar 2005
Posts: 467
Likes: 0
From: Missouri City
Default

NOS is a good company...been around for a LONG time and have proven products, but I dont think they're the best.

From everything I've seen I like NX, Cold Fusion, and harris speedworks (although their solenoids are small and can't take very large shots without upgrading)
Reply
Old Dec 30, 2006 | 08:22 PM
  #5  
FloydSummerOf68's Avatar
TECH Regular
iTrader: (1)
 
Joined: Mar 2005
Posts: 467
Likes: 0
From: Missouri City
Default

Originally Posted by onephatZ28
I have bolt on 97 lt1 camaro with a full exhaust(headers hi-flow cats to slp loudmouth) and cold air intake,and a150 shot of NX the car ran a 12.39@117mph.I did this with the bottle at 700psi.I would stay away from NOS, but that me

117...jeeze, you should be good for 11's.
Reply
Old Dec 30, 2006 | 08:33 PM
  #6  
onephatZ28's Avatar
11 Second Club
iTrader: (8)
 
Joined: Dec 2005
Posts: 1,058
Likes: 0
From: Yucaipa,CA
Default

Originally Posted by FloydSummerOf68
117...jeeze, you should be good for 11's.
Yeah, that's what I thought too, but I had no bottle heater and it was 48 degrees outside. And I couldn't get the car to hook. Someone told me the more you spin the higher MPH you'll have (within reason). Hopefully next time I will get into the 11's.
Reply
Old Dec 31, 2006 | 11:16 AM
  #7  
Jmac29's Avatar
Thread Starter
Staging Lane
 
Joined: Feb 2006
Posts: 50
Likes: 0
Default

i just came across an NX kit that replaces ur MAF too its around 800$ im thinkin to just go with that, anyone heard anything about it...
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:31 AM.