Basically I want a kit that can go up to a 200 shot, but I plan on running a 150 for a while. Here is the kicker, I want a kit that I can jet for 150, and it will actually put 150 horsepower to the ground. Can anyone advise me on a kit that can make 150 out of the box?

 

http://www.harrisspeedworks.com/shop...cat=364&page=1

This is the company I went with. they have great customer service & are always on here for tech help. Not to mention their kits are rated at the rear wheels instead of flywheel & all jets are stainless.

 

That is the exact kit I have been looking at. Seems like a no brainer for that price.

 

+1 HSW is awesome. and at a great price. i was surprised at how well packaged and put together my kit was when i got it

 

Thanks guys!

Let me know if you have any questions RobbieTransAm.

Matt

 

Thanks Matt. Can you give any information of my question about being jetted for 150 and actually making 150?

 

Check out our single nozzle and plate systems as well. The systems come with 300hp solenoids. The single nozzle kit can flow up to 250hp and the plate can do much more. The plate gives more of a custom looking install.
Dave

 

We have a few great solutions for you from both NX and Cold Fusion,

check these out
Nitrous Oxide Kits

If you don't see what you want , we have others as well and can even do custom setups for you.. we'll get ya heading in the right direction even if you don't buy from us

 

Sure, all of our jetting rated at RWHP for our kits. The single nozzle Sudden Impact wet kit comes with 75 HP, 100 HP, 125 HP, and 150 HP jetting, so you can run the 150 shot like you wanted to. Down the road when you want to step up to a 200 shot you can upgrade to our larger solenoids, or instead of going with one of our Sudden Impact kits you could go with one of our single nozzle Brute Force kits. With the Brute Force kit you would be good to a 300+ shot (and anything below power wise) and the kit is customizable as far as solenoid brackets and hose & AN fitting color combos. If you don't see yourself going past a 150 - 175 RWHP shot the SI kits are pretty hard to pass up.

Let me know if you have any other questions.

Thanks,
Matt