I am wanting to use a progressive controller, but after reading it seems it pulses the solenoids. The Timing Tuner, if I read right, activates (retards timing) after receiving the signal that the solenoid is activated.
It's not necessary to provide a wire diagram or info(would be nice if its handy though), I am just wanting to make sure it is possible to use both together.

Thanks, James.

 

Man thats a good question cuz im gonna use a timing tuner on my set up cuz dont want to lose N/A power off the juice,and thought about getting a progressive controller.Quick question for you though.You're making 400rwhp(just about)with your cam.What size shot you gonna run and how do you feel about your rear end holding up.

 

I will be using a 150shot; 50 up to 150 over 2-3 second span.
I will just be using DR's and soft launches until I get the funds to do 12 bolt or 9"....or the stocker goes.

 

do it.With the right easy launches the rear will be ok.I broke my rear and driveshaft on a N/A run but after I got used to the quick slip I ran 11s with my cam only nitrous setup in Atown.Good luck

 

Yes you can run the 2 units together...even though the solenoids are pulsing, the kit is still activated.

 

Thank you thats what I needed to know