ive put together my own wet kit out of some parts i had and i as wondering if you guys could give me some baseline jet numbers to get me started say for a 100,125, and 150 whp im running my fuel side off the rail so ill need numbers for stock ls1 im running nos cheater noids and 1 nos soft plime nozzel in the bellow i also needed to know the thread size on the nozzel
thanks in advance

 

This nozzle has 1/16NPT thread. Also 150HP is the max flow for this nozzle.

Soft Plume Single fogger wet
900-950psi N2O
55-60psi fuel
HP N2O/Fuel
100 46/28
125 52/32
150 65/36

Kyle

 

thanks man

 

Welcome!

 

I'M CONFUSED NOW. IN THE DIRECTIONS FOR THE POWERFOGGER UNIVERSAL 8 CYL. KIT, IT RECOMMENDS 65N/38F FOR A 125 SHOT @ 43psi. I REALIZE I'M AT 60psi FUEL PRESSURE, AND WAS TOLD BY AN NOS TECH LINE GUY THAT BECAUSE OF THAT, I SHOULD RUN THE FUEL PILL 3-4 SIZES SMALLER. AM I GETTING FLYWHEEL HP AND REARWHEEL HP MIXED UP?

 

The soft plume nozzle wont even flow 150hp, the orifice inside of it is only .062" I got rid of mine and got me a dynotune. I picked up 100 rwhp from a 63 nitrous jet and 35 fuel.

 

I Was Under The Impression That The Nozzle Only Flowed 125 Hp, And With The 65n Pill. I'm Hearing Different Things From The Nos Guys, Opinions Straying Even From Their Own Direction Recommendations, So I'm Like Wtf?

 

Get a new dyntotune nozzle and youll be all set.

 

I'll Give Them A Look See. Thanks.