Nice, if I was not set i'd invest in one!

 

Would this kit be compatible with NXs #20920 kit? Also, can this plate flow more than 200? I would like to run a 250 but don't want to spray it through a single fogger.

If you can answer these questions I'm gonna pick one up.

 

The plate is compatable with that system. The plate will also flow 400 hp so a 250 shot will be no problem.

-Chris

 

The plate is compatible with any brand nitrous kit.

The plate can flow 350+hp if you wanted to go that high.

Ray

 

Have you all tested it out to around a 250 and 300 shot? Did their start to be any distribution problems? Also, would you include a jetting chart (or maybe extra jets) for a 225-250-275-300 shot?

Just reply back here with these answers cause I'm sure there are other guys wondering, but somebody send me a PM about where to send payment. Thanks guys.

Brian

 

Do you take pay pal?

 

Loadre - PM Sent

Bomber Z -We do accept paypal ( Info@nitrodaves.com )

-Chris

 

Just called Ray and bought one. Thanks guys.

 

Ordered one back when they were first available but sold my LT1 car before I could install it but the quality was definitly top notch and the clean look of it alone make it worth the extra money over a nozzle kit.

 

Come one at least two more people buy a kit so they can start producing it again so when I get the money I can buy one lol.

 

I just sold my old nitrous kit!! I need spray!! Got any installed pics yet. I'm about 90 percent sure I'm gonna pick one up.

 

I have a 52mm TB now..but plan on getting a 58 and boring the intake when I do the motor next year. I couldnt use the 58 mm plate with a unbored intake and a 52 mm tb right? Would be to much of a lip?

And just to confirm, this system goes Intake>plate>TB right?

 

Wow. I must say the LT1 guys really steped to the plate on this. You guys rock!!!!We had more than enough orders to go to production the same week this post started. The order is in and we are waiting on the machine shop at this point. Do to the responce and support we will be bringing this part number back to life.

For the guys that did not pre order. You can still place your order and get the discounted price till the end of next week. MARCH the 23rd is the deadline on this special.

Thank you guys for all the support.
Dave

 

That would work. Im just not real crazy about having the lip.

You are correct. It goes between the intake and throttle body.
Dave

 

Dave, I have your 90mm nitrous plate on my fast 90 set-up now. Where putting a Beck custom Sheetmetal intake on right now. Will everything be okay using the plate with my Beck intake now. I`m spraying a 200 shot and want to be sure with the new motor. G-Force is doing it as we speak. Thanks!

 

Yes, It should be fine as long as there is room for the inlet fittings. If there is not room send me the plate and I will have the inlet fittings machined to the other side.
Dave

 

What can you guys do about us Monoblade guys, I have a Procharger setup and I thinking about doing a 35 shot or so to cool the charger. Can you guys make a plate for that?????

 

We are going over what all will have to be changed to make a monblade version....will let you know ASAP.

 

So I got until the 23rd to lock in on that price? I may be cutting it close, I just ordered cam and acc. next I was planning on the stall. We'll see. Plus I will have to tell the wife the 80+ edelbrock jets I got off ebay don't fit. Yes I know it comes with them but I never know when enough is enough. When do you think they will start shipping out?

 

So we need 5 to get the $250 Price Or it will be $310 each??

Here is the First 3, we just need 2 more.
1.) Taner
2.) T/A KID
3.) Tapout911