LT1 Plate System Group Purchase!!
Joined: Nov 2001
Posts: 10,023
Likes: 6
From: LT1 land...the "409" of the 90s!
Chris let me know on the Mono's. We might take one of those also 
Might add one to more. I am thinking of bumping my Direct port down to 150 coming out of the hole and hitting the Plate at half track with another 125
I need it to come out a little softer but still pull the top end to get my Licence
Might add one to more. I am thinking of bumping my Direct port down to 150 coming out of the hole and hitting the Plate at half track with another 125
I need it to come out a little softer but still pull the top end to get my Licence
Guest
Posts: n/a
I want one but I get my car back from being caged this week on top of having to PAY on taxes (thanks work) and plates and rent ect ect but should know about a new job on Monday after the drug test so money will be tight this month.
If it does in then is there any way I could put a small deposit down on that price? Or is it money up front and thats it. Have killer buyer feedback by the way
58MM Converson plate.
If it does in then is there any way I could put a small deposit down on that price? Or is it money up front and thats it. Have killer buyer feedback by the way
58MM Converson plate.
Last edited by JUICED96Z; Mar 11, 2007 at 10:01 PM.
TwoFast4Lv they have the same sell on CamaroZ28.com check it out
http://web.camaross.com/forums/showt...=505135&page=2
If you get one you will be the 5th Person
Thats 4, we need 1 more
1.) Taner
2.) T/A KID
3.) Tapout911
4.) My Iroc Z28
5.) TwoFast4lv?????
This would get the Group Purchase Through at $250.00 for the plate
http://web.camaross.com/forums/showt...=505135&page=2
If you get one you will be the 5th Person
Thats 4, we need 1 more
1.) Taner
2.) T/A KID
3.) Tapout911
4.) My Iroc Z28
5.) TwoFast4lv?????
This would get the Group Purchase Through at $250.00 for the plate
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Loadre
These gettin close to being done at the machine shop?
"We need a total of 10 orders. It can be in a system form or conversion form. You have your choice of 52mm or 58mm.
It will take ruffly 3-4 weeks from the time the special ends for us to be able to ship the product."
Let me know if you have any questions.
Dave
11 Second Club
Joined: Jul 2005
Posts: 1,089
Likes: 3
From: West Linn, Oregon
Damn, I wish you did this last year... I just joined a N/A racing series this year and part of the rules are absolutly no N20 stuff on the car, but out of curiosity I have a question...
Would it be a PITA to swap this out to go back and forth from N/A to N20? I would think this would be easier with this then other delivery methods. Since there is nothing to drill or plug into the intake tubing and etc...
Would it be a PITA to swap this out to go back and forth from N/A to N20? I would think this would be easier with this then other delivery methods. Since there is nothing to drill or plug into the intake tubing and etc...
Guest
Posts: n/a
Originally Posted by 1SlowFormula
Damn, I wish you did this last year... I just joined a N/A racing series this year and part of the rules are absolutly no N20 stuff on the car, but out of curiosity I have a question...
Would it be a PITA to swap this out to go back and forth from N/A to N20? I would think this would be easier with this then other delivery methods. Since there is nothing to drill or plug into the intake tubing and etc...
Would it be a PITA to swap this out to go back and forth from N/A to N20? I would think this would be easier with this then other delivery methods. Since there is nothing to drill or plug into the intake tubing and etc...
No harder than pulling the TB off...will the class let you leave the wiring and main feed line?
If so you could use quick disconnects at the ends of the wiring harness and remove the kit in less than 30min.
11 Second Club
Joined: Jul 2005
Posts: 1,089
Likes: 3
From: West Linn, Oregon
Originally Posted by Ray@Nitrous Outlet
No harder than pulling the TB off...will the class let you leave the wiring and main feed line?
If so you could use quick disconnects at the ends of the wiring harness and remove the kit in less than 30min.
If so you could use quick disconnects at the ends of the wiring harness and remove the kit in less than 30min.
http://www.ramracing.us/smf/index.php?topic=889.0
So figure they will ship out in another couple weeks? I had another question I just thought about today. On NX's kit you have to run the SHO line to run a 200 shot. Is it still the same with this plate (or is the nitrous jet smaller?) Just wondering, doesn't really matter cause I already have the SHO hose.
