Stand alone fuel system problem.PLEASE HELP !!!
Thread Starter
Teching In
Joined: Sep 2004
Posts: 19
Likes: 0
From: bakersfield,ca.
Stand alone fuel system problem.PLEASE HELP !!! I have an NX direct port set up by nitro Dave. The problem is when I spray it the fuel preasure drops to O for at least a second and a half 
Here is what I've done so far.
New walbro 255 in line pump
6 AN supply line from tank to pump no obstructions(checked many times)
6 AN line that Y's to solinoids ( no 90's)
solinoids discharge direct to hex distibution bars
purge ports from solinoids tee together to preasure regulator set @ 57 psi
Has anyone had this problem, PLEASE HELP
Here is what I've done so far.New walbro 255 in line pump
6 AN supply line from tank to pump no obstructions(checked many times)
6 AN line that Y's to solinoids ( no 90's)
solinoids discharge direct to hex distibution bars
purge ports from solinoids tee together to preasure regulator set @ 57 psi
Has anyone had this problem, PLEASE HELP
Wish I could help but I have a low pressure set up and it stays solid. A pump at 57 psi should not drop to 0. Have you checked the pressure with a mechanical gauge with the n20 off and blip the fuel.
