Nozzle help needed
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Nozzle help needed I have been thinking about buying a new nozzle. I bought a used NOS kit with the single nozzle (fogger) I know its rated at the flywheel and i would like it to be rated at the wheels.
Should i buy new jets for my NOS fogger nozzle that are actually rated to the wheels? This would be the cheaper route(just buy new jets)
Or should i buy a new nozzle/jets from a vendor that is already rated at the wheels? This would easily cost me $80-$100)
I really need some advice because i'm confused.....Thanks
Should i buy new jets for my NOS fogger nozzle that are actually rated to the wheels? This would be the cheaper route(just buy new jets)
Or should i buy a new nozzle/jets from a vendor that is already rated at the wheels? This would easily cost me $80-$100)
I really need some advice because i'm confused.....Thanks
Last edited by BayAreaSS; May 2, 2007 at 06:50 PM.
apparently, my nozzle testing, i did, is no longer sticky worthy.
https://ls1tech.com/forums/showthrea...nozzle+testing
https://ls1tech.com/forums/showthrea...nozzle+testing
Thread Starter
TECH Veteran
iTrader: (10)
Joined: May 2006
Posts: 4,240
Likes: 2
From: Bay Area, CA (Pittsburg)
Originally Posted by mrr23
apparently, my nozzle testing, i did, is no longer sticky worthy.
https://ls1tech.com/forums/showthrea...nozzle+testing
https://ls1tech.com/forums/showthrea...nozzle+testing
It looks like the fogger nozzle i had is at the bottom of the list. I have the black fogger nozzle
