Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Tune + 150 shot?

Old May 7, 2007 | 03:20 PM
  #1  
jdiddyws6's Avatar
Thread Starter
TECH Enthusiast
iTrader: (5)
 
Joined: Jun 2006
Posts: 641
Likes: 0
From: Long Beach MS/Birmingham AL
Default Tune + 150 shot?

With my mods and tune is it safe to run a 150 wet shot off the stock fuel system?
Reply
Old May 7, 2007 | 08:59 PM
  #2  
Z2K_MrJ's Avatar
Board Certified Idiot
 
Joined: Oct 2005
Posts: 714
Likes: 0
From: EHT ..New JERSEY
Default

With all Your Mods I would Highly Advise it..
Reply
Old May 7, 2007 | 10:02 PM
  #3  
99Silverado5.3's Avatar
TECH Addict
20 Year Member
iTrader: (7)
 
Joined: May 2004
Posts: 2,559
Likes: 1
From: (281)-(713)-(832)
Default

Just get some tr6 plugs and hit it with the 150!
Reply
Old May 8, 2007 | 06:04 AM
  #4  
2001z's Avatar
Banned
iTrader: (32)
 
Joined: Mar 2005
Posts: 1,157
Likes: 0
From: Fountain Inn, SC
Default

I would get a intank pump i mean your looking at 250 for the racetronix and hotwire kit!! Why not play it safe either way ? I say get an intake pump and call it a day I know i had to!
Reply
Old May 8, 2007 | 08:23 AM
  #5  
jdiddyws6's Avatar
Thread Starter
TECH Enthusiast
iTrader: (5)
 
Joined: Jun 2006
Posts: 641
Likes: 0
From: Long Beach MS/Birmingham AL
Default

I'm also getting a gen x2 kit...and i'm gonna call rwtd to see what my a/f's were and if they are within limits
Reply
Old May 8, 2007 | 05:26 PM
  #6  
Chad@LivernoisMotors's Avatar
LS1TECH Sponsor
 
Joined: Nov 2006
Posts: 139
Likes: 0
From: Downriver
Default

Originally Posted by jdiddyws6
With my mods and tune is it safe to run a 150 wet shot off the stock fuel system?

With a good safe Dyno tune with a little bit of timing pulled out and some TR6 plugs you will be fine all day on a 150 shot. Injectors and Fuel pum should be fine as long as you only have bolt ons and no internal work. I would get it tuned on the dyno with the nitrous just to be safe and watch the injector duty cycle.

Chad @ Livernois Motorsports
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:22 PM.