Nitrous setup makeover
Thread Starter
Joined: Apr 2002
Posts: 5,231
Likes: 20
From: Houston TX
Nitrous setup makeover I finally redid my setup. I'd like to thank NXRICKY for the diagram he hooked me up with. The way it was installed previously was a 30 min half assed job with no relays, on/off switch or WOT switch. It was basically turn the key forward and press the pushbutton 
.
I had my buddy redo the hardlines to the nozzle for me and we used black and silver AN fittings and I bent my first ever hardline for my purge with two lines sticking out the cowl. I also installed my bottle heater, MDS WS, a couple buttons under the steering column and mounted the bottle in the hatch.
.I had my buddy redo the hardlines to the nozzle for me and we used black and silver AN fittings and I bent my first ever hardline for my purge with two lines sticking out the cowl. I also installed my bottle heater, MDS WS, a couple buttons under the steering column and mounted the bottle in the hatch.
