sorry Im sure this has been beat to death and I would do a search but its screwed up.. anyway Im about to start building a 11.1 408 and looking for a good nitrous cam Im looking to spray around 300 shot. my goal (for now) is mid 9s on spray and be able to drive to car if I want.

 

this is the cam i put in my 408

vinci 099 third one down
http://vincihighperformance.com/CAMS...%20LS1%202.htm

 

I went a little bigger on cam, and it's very nitrous friendly. here's a thread and talk on cams, my cam specs are in post #10, a custom spec'ed roller and high rpm use. I did a thread on my short block 408 build if ya can find it, I didn't save it, but may give ya a little insight on where/why I am going with my set-up.
Robert

Edit: https://ls1tech.com/forums/nitrous-oxide/741853-ms4-cam-nitrous.html

 

bump for ya and a PM. Im building the same setup