Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

help!! 125 shot on c5 a4, no kick down. whats wrong?

Thread Tools
 
Search this Thread
 
Old 08-21-2007 | 07:10 PM
  #21  
wyndzer's Avatar
9 Second Club
 
Joined: Sep 2005
Posts: 151
Likes: 0
From: Wilson, NC
Default

Originally Posted by Oso SS
I'll read all this **** later but just because the bottle weighs 24.5 pounds doesn't mean it's got nitrous in it. It's possible to have a **** ton of air in there too and I'm pretty sure air weighs more than nitrous... correct me if I'm wrong so I don't ever say it again lol
Please tell me you are joking.
Old 08-21-2007 | 07:53 PM
  #22  
streetvet's Avatar
Staging Lane
 
Joined: Nov 2006
Posts: 76
Likes: 0
From: Central Jersey
Default

A 97 vette only is 345 hp. , add a 100 shot its more like a awhooo, 150 shot is a yeaaaaah, 250 shot is WOOOOW then BOOM 1050 psi is a must
Old 08-21-2007 | 09:21 PM
  #23  
97C5VETTE's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2007
Posts: 96
Likes: 1
Default

Originally Posted by streetvet
A 97 vette only is 345 hp. , add a 100 shot its more like a awhooo, 150 shot is a yeaaaaah, 250 shot is WOOOOW then BOOM 1050 psi is a must
yeah thats what im talking about. Im running the 125 shot and its like no big deal then again my bottle pressure was a tad above 900psi. Ill turn on the heater and see what I can get it to and try it again. I will keep everyone posted. Thanks to everyone that has chimed in.
Old 08-23-2007 | 12:04 AM
  #24  
97C5VETTE's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2007
Posts: 96
Likes: 1
Default

Well, went out and tried it again. You guys were right when you said that the zex bottle heater only heats the bottle up to around 900 psi. My gauge was only a tad above the 900 mark and the heater was already off. Anyway, the car did feel a bit faster but nothing special. Im going to try to set the psi at 1050 and give it another go. Does anyone know if we can turn up the temp for the heater if we open it up because it's sealed? Why in the hell would zex only set them for 900psi? This was just a waste of money(zex bottle heater). Ill start a new thread to see if anyone has opened up the zex heater. Thanks for everyones input. You have all been very helpful.




All times are GMT -5. The time now is 04:27 PM.