Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Install Complete (2 stages w/pics)

Old Aug 31, 2007 | 09:56 AM
  #21  
LostCauseZ06's Avatar
Thread Starter
11 Second Club
iTrader: (4)
 
Joined: Jul 2005
Posts: 1,294
Likes: 0
From: Ogden, Utah
Default

Originally Posted by Robert56
Nothing like a Bad Azz, red, '02, Z06, 408 with a dual stage. But then again I may be biased. Nice job, something to be proud of. Now go get some times and post em up on the Z06 Fast List.
Robert

actually already have tires i can pull 1.7's pretty consistently elevation is what kicks my butt up here...


goin for 10's or bust next weekend!!!!
Reply
Old Aug 31, 2007 | 08:14 PM
  #22  
Robert56's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 9,557
Likes: 1
From: Tacoma, WA
Default

Originally Posted by LostCauseZ06
actually already have tires i can pull 1.7's pretty consistently elevation is what kicks my butt up here...


goin for 10's or bust next weekend!!!!
ET Streets has allowed a best of 1.51 60 here. As you know, driving a M12 and independant rear to 10.xx's is no easy feat. My goal (which will have to wait till next season) is to hit the 9.xx region, which only a handfull that I know of have done with any amount of power. good luck and keep us updated.
Robert
Reply
Old Sep 4, 2007 | 12:03 PM
  #23  
Ping King's Avatar
TECH Fanatic
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (20)
 
Joined: Feb 2003
Posts: 1,636
Likes: 9
From: PA
Default

i had a friend who decided to use teflon tape on a 7 sec nitrous setup...he promptly had a solenoid stick and blow the motor the f up.
Reply
Old Sep 4, 2007 | 04:04 PM
  #24  
LostCauseZ06's Avatar
Thread Starter
11 Second Club
iTrader: (4)
 
Joined: Jul 2005
Posts: 1,294
Likes: 0
From: Ogden, Utah
Default

Originally Posted by Robert56
ET Streets has allowed a best of 1.51 60 here. As you know, driving a M12 and independant rear to 10.xx's is no easy feat. My goal (which will have to wait till next season) is to hit the 9.xx region, which only a handfull that I know of have done with any amount of power. good luck and keep us updated.
Robert

robert, were you on a stock rear end and stock output shaft?
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:29 AM.