2 Stage Kit

Reply Subscribe

Thread Tools

Search this Thread

Oct 29, 2007 | 12:08 PM

1BaadGoat

Thread Starter

Staging Lane

iTrader: (1)

Joined: Oct 2007

Posts: 81

Likes: 0

From: Kannapolis, NC

2 Stage Kit

I was looking at doing a 2 stage Kit fired up the CNC Machine, and Got together with Barry Grant, and we made a Plate and Installed 2 Nozzles in it.

It Came Out Pretty Good. See Images. My Question is activation. I Purchased a NOS 2 Stage Mini Controller, and a FPSS. I have a 05 A4 GTO Would I need another FPSS, and a TPS Switch, and how do I go about wiring the System, as I am in no way an electrician? Any help would be greatly appreciated

Attached Thumbnails

Last edited by 1BaadGoat; Oct 29, 2007 at 12:15 PM.

Oct 29, 2007 | 03:19 PM

Ray@Nitrous Outlet

Guest

Posts: n/a

Looks like someone is pretty handy with a cnc machine....PM sent about a few concerns I had....the NOS 2 stage mini controller will controll both stages...let me know if you have any other questions

Oct 29, 2007 | 03:40 PM

TARZAN

11 Second Club

iTrader: (12)

Joined: Dec 2003

Posts: 1,312

Likes: 0

From: Memphis Area

you *should* be able to wire them both up off one FPSS....Nice work BTW

-Will

Oct 29, 2007 | 03:42 PM

Ray@Nitrous Outlet

Guest

Posts: n/a

Quote:

Originally Posted by TARZAN

you *should* be able to wire them both up off one FPSS....Nice work BTW

-Will

yes the FPSS can be used to cut ground to the controller

Oct 29, 2007 | 04:54 PM

1BaadGoat

Thread Starter

Staging Lane

iTrader: (1)

Joined: Oct 2007

Posts: 81

Likes: 0

From: Kannapolis, NC

Thanks for the comments - Just something done down & dirty. Someone (ahem no names mentioned) expressed some concerns with the layout so I am rethinking the layout, maybe do a ring instead of a plate. Do all 4 wires need to go to the FPSS? Or just both the N20 Solenoids?