hsw nitrous braided line
Thread Starter
Registered User
Joined: Dec 2007
Posts: 42
Likes: 0
hsw nitrous braided line yah i was going to purchase one of your 4an braided lines but i notice that it says build your own custom length stainless steel braided hose,has anyone purchased one of these online.do you have to put it together or is it already assemble for you when it arrives.
its already assembled, "build your own" means you get to choose the length of the hose, color of it and color of the fittings.
You build it online by selecting the hose style (color), and the color of the fittings. I went with Black hose w/ Black fittings. Its fully assembled before it gets to your door. Matt set me up with -4 Hose with a -3 nozzle ends for my dry system (vice using -3 hose) 
.
. Awesome I didn't know this was an option at harris always have had good service there....!.. I need about 12' of -6 line...
Not to steal the thread but since this thread has a sponser attn. do you make a -4 -4 -6 Y for nitrous flow. I am going to start running 2 bottles... I should use a -6 line to the noids correct...? or do you think the -4 is enough flow. I am also going to start running dual stage 150 + 50 shot but just want the dual bottles for more consitant pressure.
Thanks!
Not to steal the thread but since this thread has a sponser attn. do you make a -4 -4 -6 Y for nitrous flow. I am going to start running 2 bottles... I should use a -6 line to the noids correct...? or do you think the -4 is enough flow. I am also going to start running dual stage 150 + 50 shot but just want the dual bottles for more consitant pressure.
Thanks!
Trending Topics
Awesome I didn't know this was an option at harris always have had good service there....!.. I need about 12' of -6 line...
Not to steal the thread but since this thread has a sponser attn. do you make a -4 -4 -6 Y for nitrous flow. I am going to start running 2 bottles... I should use a -6 line to the noids correct...? or do you think the -4 is enough flow. I am also going to start running dual stage 150 + 50 shot but just want the dual bottles for more consitant pressure.
Thanks!
Not to steal the thread but since this thread has a sponser attn. do you make a -4 -4 -6 Y for nitrous flow. I am going to start running 2 bottles... I should use a -6 line to the noids correct...? or do you think the -4 is enough flow. I am also going to start running dual stage 150 + 50 shot but just want the dual bottles for more consitant pressure.
Thanks!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
