good nitrous cam for my application
good nitrous cam for my application ok guys, basically i have read read and read, at first i was set on a big nasty cam like a Trex or HPE megadeath, but the more i read ill need a huge stall and big gears. the mods on the car will be as follows:
headwork on 241 heads..minor head work to help with flow
performabuilt tranny with a 3200-3600ish stall
(currently have 3.73's, might be willing to go 4.10's when i put in the 9 inch)
HSW nitrous wet kit.. car will be seeing a 100 shot
and the other bolt ons, LS6 intake, headers, cai, etc.
my goals for the cam....go big or go home, works well with the nitrous, suitable for my stall/gears applications, LOPEY, street manners mean very little, car wont be daily driven. basically i dont want a cam to have NO low end torque on all motor, i would like something to perform well on all motor, have low end TQ also.
headwork on 241 heads..minor head work to help with flow
performabuilt tranny with a 3200-3600ish stall
(currently have 3.73's, might be willing to go 4.10's when i put in the 9 inch)
HSW nitrous wet kit.. car will be seeing a 100 shot
and the other bolt ons, LS6 intake, headers, cai, etc.
my goals for the cam....go big or go home, works well with the nitrous, suitable for my stall/gears applications, LOPEY, street manners mean very little, car wont be daily driven. basically i dont want a cam to have NO low end torque on all motor, i would like something to perform well on all motor, have low end TQ also.
well imho i wouldnt go with a huge cam for the spray...bigger is not always better but you know that already. dont waste your money on an hpe cam....please dont...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Even something like a Torquer 3 (231/234 .643/.598) would make great NA power, work well with the 3600 converter you have and take to N2o well.
My car ms3,3800 stall, 3.42, full bolt ons and 150 shot 10.89 @ 124 1.75 60' not spraying out of the hole 10 bolt. The 4.10 gears will help you out n/a my best n/a was 12.0 @115 this was all on a mail order tune for texas speed
http://videos.streetfire.net/video/6...5a011ab51d.htm
http://videos.streetfire.net/video/6...5a011ab51d.htm
Last edited by 2000 Ultra Z; Jan 25, 2008 at 03:48 PM.
Torquer 2 or MS3...both work really good with nitrous....got a buddy running the torquer 2 tuned for spray..picked up 106hp on just a 75 shot.....runs mid to low 11's on the 75 shot and thats with a 5500 DA...stock heads and a Vig 3600 stall.
buy a NA cam and spray it..... nitrous just increases cylinder pressure by the boatload. If you want to do something more specific.... increase the LSA over 114+ and go longer on the exhaust duration. Nitrous performes the best from 3000-5500.... so make your power there and keep the motor alive. And stick with a 4000 stall... unless you plan to spray over a 200 shot... then I would get something tighter or more expensive.
You do not need a "NOS" profile cam, you can use a standard dual pattern design and make great all around power/trq., and still perform excellent on spray. Custom Crane HR5 Lobe 232/236 .600/.600 112+3.5 will do EXACTLY what you want it to do.
Joe
Joe
