Wiring the Timing Tuner Question?
Thread Starter
12 Second Club
iTrader: (4)
Joined: Jul 2007
Posts: 310
Likes: 0
From: Albuquerque, NM
Wiring the Timing Tuner Question? Should I wire it after the WOT switch so it retards the timing only at WOT? Or should I wire it before the WOT switch so it retards the timing when I activate the system? Will it act fast enough?
Generally, you would wire the Timing Tuner so that the switched ground is the ground for the WOT switch. I think it only takes something like .008 seconds to retard the timing, so it's done before the first shot of nitrous is even hitting the cylinders.
Guest
Posts: n/a
This is they way I would do it also.
Thread Starter
12 Second Club
iTrader: (4)
Joined: Jul 2007
Posts: 310
Likes: 0
From: Albuquerque, NM
OK, so I will run it after the WOT switch. Between the WOT switch and the system relay on the yellow wire, right? Then the other wire from the Timing Tuner will go to the FPSS then to the black wire on the system relay. I think I got it Thanks.............
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
