Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

dynotune lean shut down switch

Thread Tools
 
Search this Thread
 
Old Feb 8, 2008 | 07:49 PM
  #1  
starbucks's Avatar
Thread Starter
11 Second Club
 
Joined: Mar 2007
Posts: 391
Likes: 0
Default dynotune lean shut down switch

Does anybody know what wire the lean shutdown switch connects to on for the O2's. And i would like to here what you guys have to say about there switch weather you like it or not. thanks
Reply
Old Feb 8, 2008 | 07:53 PM
  #2  
myfast70's Avatar
10 Second Club
iTrader: (38)
 
Joined: Oct 2006
Posts: 1,259
Likes: 0
From: Phoenix, Az
Default

It connects to the purple wire on your o2 sensor. I still haven't had a chance to install mine yet so I have no feedback yet.
Reply
Old Feb 9, 2008 | 12:52 AM
  #3  
starbucks's Avatar
Thread Starter
11 Second Club
 
Joined: Mar 2007
Posts: 391
Likes: 0
Default

thanks for the reply. does it matter witch side left or right?
Reply
Old Feb 9, 2008 | 08:20 AM
  #4  
Bigfoot99's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jun 2006
Posts: 50
Likes: 0
Default

I just installed mine last week. I hooked it up to the right side header, but I don't believe it matters which side you connect to.

Thing works great.
Reply
Old Feb 9, 2008 | 01:34 PM
  #5  
madclown's Avatar
12 Second Club
iTrader: (4)
 
Joined: Jul 2007
Posts: 310
Likes: 0
From: Albuquerque, NM
Default

Does it display the A/F Ratio steady while at WOT?
Reply
Old Feb 10, 2008 | 12:11 PM
  #6  
Bigfoot99's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jun 2006
Posts: 50
Likes: 0
Default

Originally Posted by madclown
Does it display the A/F Ratio steady while at WOT?
Not perfectly steady as it does fluctuate, but it does only range a little. Usually .80 to .85 (narrow band).
Reply




All times are GMT -5. The time now is 05:51 PM.