so pissed!!!! i need your help guys
so pissed!!!! i need your help guys ok so i bought a used silonoid for my purge kit. it was stuck open, no big deal got my money back and everything. so today i bought a brand new edelbrock nitrous silonoid. i put it on my car and it worked fine for about 5 times. then i tried it again...opened my bottle and before i hit the button i hear nitrous coming out!!!! its stuck open again. i do hear it click when i press the button. so do i just have bad luck or is there something im missing???sorry for the long post!
Did you dry fire the noid?
If you were dry firing the noid, you may have damaged it if you held it open for more than 5 seconds when testing without flow.
The Nitrous Noids use the flow of Nitrous for cooling, and most instructions sets have a warning concerning this.
If you were dry firing the noid, you may have damaged it if you held it open for more than 5 seconds when testing without flow.
The Nitrous Noids use the flow of Nitrous for cooling, and most instructions sets have a warning concerning this.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo