well this is my first time installing nitrous and so far so good i think. i went all out and bought a fuel cell, and nitro daves 85mm polished plate kit(which is freakin amazing THANKS Chris and Dave for all the help and sweet stuff) i also made a custom bracket to mount the fuel cell, and aeromotive fuel pressure regulator, and i also made my own switch panel for the nitrous out of carbon fiber. but here are a few pics let me know what you think.

oh and dont mind the wiring mess i havent gotten to cleaning up everything yet

 

sorry the pics kind of suck they are off of a camera phone

 

Looks good, Yeah the wiring is the hardest and most time consuming part, take your time and try to enjoy it......

 

i ran all the wires i just have to finish soldering all the ones under the hood together, and then clean them all up. all the connections were soldering and shrink wrapped the on connectors on the ones on the switch panel and im going to put some by the solenoids so they can be swapped out if needed withought having to cut wires.

 

YOU ran all the wires??? I think not

 

im sorry criminiss and I ran my wiring but i did make my brackets...lol

 

Looks good, what intake manifold you running?

 

Who's fuel cell is that?

 

its a ported typhoon 85mm intake, and the fuel cell is a harris speedworkks fusebox relocation fuel cell that i put in the battery side instead

 

That might be the first kit you installed, but I can tell you did plenty of research before doing anything.
That looks great so far!
Vinny

 

i did thank you...i actually have an 860 heater bracket on top of my tunnel mount bracket, ill take some pictures of that too.

 

Looking good..... The top of that motor is blinging.
Dave

 

yeh just wait until the sheet metal valve covers go on with the new heads and cam...o and the coul relocation brackets too...

 

its going to be the fastest looking 10 sec car ever...lol