Which wire should i use for the keyed ignition 12 volts?? And am i correct on a 2000 pcm pin 24 dark blue wire on the red connector is the TPS wire?
Thanks Brett

 

no one??

 

I was told to get the 12 volts from the fuse box under the hood!

 

In the fuse block which is visible when you open your driver's door, there is an unused block labeled IGN. This is a switched 12V source. Run a wire/spade into it for your 12V Switched source.

Pin 24 in the Red PCM is your throttle positioning sensor.

Jeff