Nitrous Install Complete
Nitrous Install Complete I finally completed my odds and ends with much help from a few vendors and a member here.
My system was installed by my local speed shop (not a vendor so I won't mention). While I was very pleased, being a jerk I had to tinker
Needless to say, I should have left well enough alone but hey it's now done and I am thrilled with the outcome. 
It's a NOS wet plate system set at 150
I am using the Trick Performance/DynoTune RPM Window switch. With a little parts help from Nitrous Outlet for my purge issue. Thanks to all involved, I appreciate all your time and effort. Here are some pictures. My Speed Shop did the noids and plate I rewired it all, and installed the purge. 
I am very pleased with how nice it came out. Hopefully I will get to test it eventually.
My system was installed by my local speed shop (not a vendor so I won't mention). While I was very pleased, being a jerk I had to tinker
Needless to say, I should have left well enough alone but hey it's now done and I am thrilled with the outcome. It's a NOS wet plate system set at 150
I am using the Trick Performance/DynoTune RPM Window switch. With a little parts help from Nitrous Outlet for my purge issue. Thanks to all involved, I appreciate all your time and effort. Here are some pictures. My Speed Shop did the noids and plate I rewired it all, and installed the purge. I am very pleased with how nice it came out. Hopefully I will get to test it eventually. Looks Great, man I wish I could keep my car that clean!
PM me if you want a new control panel (no switches, since ya have em already) that leaves where the screws are logo/text free.
PM me if you want a new control panel (no switches, since ya have em already) that leaves where the screws are logo/text free.
That's for my line loc.
Thanks Jim it looks fine but if I have a change of thought, I'll contact you.
Here is the picture of the purge line. That's right where the drivers fender meets the windshield.
Here is the picture of the purge line. That's right where the drivers fender meets the windshield.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
It comes up from under the shift boot and attaches right above the tape. You can see the top of the wire just above the tape on the left side. Maybe I can glue a piece of black vinyl or leather over it? Thanks to all of you, for the props.
Thanks to my Speed Shop for the initial install, before I touched it.
Thanks to Beer99C5 for the patience of a saint.
Thanks to DynoTune for help, window switch, fast shipping.
Thanks to Trick Performance for technical assistance (without my making a purchase)
Thanks to Nitro Daves Nitrous Outlet for the purge parts, quick shipping, professional service.
