I just can't stop touching my Nitrous system. Today I decided since I don't race on the street (very rarely drive on street) I don't need the bottle within my reach. I have removed the bottle from where it was and will now mount it in the center compartment.
This will allow the bottle top to be sticking out and a lot easier to remove and install for refilling. Right now it needs to be loosened and removed from turning backwards in the drivers seat.

I am Gorilla gluing a piece of 3/4" MDF to the center compartment for the mounts. I won't be to the track for quite a while since they have just started the replacement of the local facility. Needless to say, I am not in any rush.

Looks like this now


Looking at something vaguely similar to Roberts install on his 97.

 

Alright so far I have moved the Nitrous line AND installed the MDF mounting platform AND the mounts. The purple cylinder is just for fitting purposes as it's empty.

 

Not as nice as Roberts but much better than when I started.

Started out like this.


Like this so far. I have detail work to do yet.

 

Waiting for the dual bottle setup pics

 

One at a time man. Give me a chance to tinker some more with this before I blow the darn thing to smithereens.

 

Its a sickness..I can't stop either...BAP will be here Monday

LOL looking good 16!

 

Alright it is complete I think

Here are the final pictures.





I am far from a pro but think it came out very well and exactly as i had imagined.

 

I should find pics of the fiberglass cover I made for my old 15lb bottle mount. Talk about a cluster to make something nice looking