Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

NXL nitrous install HELP!!!!!!

Thread Tools
 
Search this Thread
 
Old 06-29-2008 | 09:56 PM
  #1  
cbra-klla's Avatar
Thread Starter
TECH Enthusiast

iTrader: (52)
 
Joined: Jun 2007
Posts: 523
Likes: 0
From: Summersville, WV
Default NXL nitrous install HELP!!!!!!

Finished up my install today....I had a couple of pounds left in the bottle so i figured i would try it out. when the nitrous engages, the engine flutters and bogs horribly as if it is just opening the fuel noids...it takes about a second to clear out, then runs fine...i know my bottle wasnt full, but i got the pressure up to 950 before i sprayed it...i have never felt a car flood that bad when they run out of bottle either...i have had and been around several nitrous cars before, but never a direct port setup...

I know i need to purge it first also... it bogs every time the nitous is engaged.

i am curious to know if maybe the fuel accumulator is giving me any problems, but shouldnt it not matter long as the fuel maintains the same pressure?

i dropped the bottle off tonight to get filled..ill try it again tomorrow with it full to see if it fixes the problem..

any other ideas if that doesnt help???
Old 06-29-2008 | 10:38 PM
  #2  
Hennytime's Avatar
12 Second Club

iTrader: (33)
 
Joined: Jan 2005
Posts: 2,584
Likes: 0
From: winter springs, fl
Default

low pressure im sure killed it, also purge it to get the instant hit
Old 06-30-2008 | 03:00 PM
  #3  
CODE4LS1's Avatar
TECH Apprentice
iTrader: (4)
 
Joined: May 2002
Posts: 380
Likes: 0
From: Redlands, CA
Default

That kit needs the accumulator so it doesnt fall flat on is face. I have it on my NXL kit.




All times are GMT -5. The time now is 06:14 PM.