Direct Port Question

Reply Subscribe

Thread Tools

Search this Thread

Aug 14, 2008 | 11:34 AM

web8745

Thread Starter

Staging Lane

iTrader: (2)

Joined: Nov 2007

Posts: 53

Likes: 0

Direct Port Question

What is the smallest shot you can run on a direct port set up?

Want to run a 100 shot but not sure.

And if so what size jets would be required.

Aug 14, 2008 | 11:46 AM

Nitro Dave's Nitrous Outlet

FormerVendor

iTrader: (25)

Joined: Jun 2002

Posts: 12,283

Likes: 4

From: Waco, TX

You can run a 100 on a directport. However if you are running it on the factory fuel system at 60 psi the orfice size of the fuel jet will be very small.
Dave

Aug 14, 2008 | 01:38 PM

Chris@NitroDaves

Guest

Posts: n/a

100 HP @ 60PSI
20n
12F

Aug 14, 2008 | 02:13 PM

Mike@HSW

FormerVendor

iTrader: (6)

Joined: Nov 2007

Posts: 1,593

Likes: 0

From: Glenolden, PA

Quote:

Originally Posted by web8745

What is the smallest shot you can run on a direct port set up?

Want to run a 100 shot but not sure.

And if so what size jets would be required.

do you have intentions of eventually going larger? im just curious why you want an elaborate system for such a small shot. running a low psi standalone would make it much easier to run that small of a shot

Aug 15, 2008 | 01:32 AM

Sammyboy

TECH Regular

iTrader: (9)

Joined: Jul 2008

Posts: 432

Likes: 0

From: Knoxville, TN

He must....plus nothing beats the looks of a direct port.

Aug 15, 2008 | 10:05 AM

web8745

Thread Starter

Staging Lane

iTrader: (2)

Joined: Nov 2007

Posts: 53

Likes: 0

No i have no intentions of going any bigger than say a 125 shot .. Just believe that a direct port is the safest way to go.

What do you all think?

Aug 15, 2008 | 10:21 AM

Mike@HSW

FormerVendor

iTrader: (6)

Joined: Nov 2007

Posts: 1,593

Likes: 0

From: Glenolden, PA

Quote:

Originally Posted by web8745

No i have no intentions of going any bigger than say a 125 shot .. Just believe that a direct port is the safest way to go.

What do you all think?

Yes technically it is the path to the most even distribution of nitrous and fuel to each cylinder. It would be WAY overkill for your intentions with it though. If you wanted it for show car intentions then so be it, but it’s really unnecessary for your plans. I would recommend a plate kit in my honest opinion; our 360 degree perimeter spray pattern offers great distribution and that is what I would suggest you use.

Reply Subscribe