not that i would ever try and hide nitrous. has anyone ever put a dry nitrous fogger really deep inside the air pump line to the intake? i mean real far down. do you think the maf would be able to pick enough of it up?

 

I've never heard of anyone doing it that way.... If someone was wanting to hide a nitrous kit...there are a lot of easier way

 

for the maf to respond correctly you need to have the nozzle about 3-4 inches before the maf.

 

i am going to get the car tunned so not to worried about the maf reading all of it. I cant think of an eaiser way to hide it. I need to be able to pop my lid and pull my filter. And the money maker kit is burnt also

 

so your gonna run your line through the air line into the lid? Whats gonna keep that line in place when all that pressure goes through it and it beats your lid to peices?

 

To answer everyones question. The A.I.R pump line is perfect.

The key is a clear lid and that throws alot of folks off as well. Have the stock air pump ''plumbed'' with your nitrous line (n2o line inside the black rubber hose). You can mount the solenoid where the A.I.R pump used to be (out of sight of course.)

You will need to drill a hole in your lid and the piece that goes into the lid has a ''lip'' that keeps it in place and from falling out along with a clip that does not allow it to wiggle loose or anything. If you have all the stock pieces that came with the A.I.R pump, you will see what I'm talking about.

 

Think that about answers you question you sneaky **** I'm gonna rat you out to Darren and the cobra boys