Got some testing done last night....
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
That's the controller i'm running, what was urs doing? What's weird is it worked from a roll when I hit it to test when I first put it on. That's why i'm thinkin maybe a bad ground, maybe under load from the launch it's not gettin enough ground to open the noid immediately, cuz a buddy said the nitrous noid takes more to open than the fuel does, so the fuel might not have a problem while the nitrous one does.
I was trying to run 4 noids and the FJO could not handle the amps which make it back feed and the car would surge. I have been told that some noids draw ALOT more than others. if you have a 2 noid system I doubt this is your problem but you never know.
I wound up just using a WOT switch ONLY to activate my DP last year.
I wound up just using a WOT switch ONLY to activate my DP last year.
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
I was trying to run 4 noids and the FJO could not handle the amps which make it back feed and the car would surge. I have been told that some noids draw ALOT more than others. if you have a 2 noid system I doubt this is your problem but you never know.
I wound up just using a WOT switch ONLY to activate my DP last year.
I wound up just using a WOT switch ONLY to activate my DP last year.
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
throw the stupid thing in the trash. i gave up on fancy controllers. i run a micro switch with a micro switch back up i run it threw and NOS basic timmer incase i want to add delay. but thats it. every time i used fancy crap somthing screwed up some place.
now i go simple as possable
now i go simple as possable
