I have a 2000 Camaro with Patriot Ls6 Heads,.581 lift(224/224) cam,vig 3600 stall that flashes around 4000K,3.27 rearend. Harris plate system with 125 shot.Where to set the rpms for the window switch? Any suggestions?

 

stay above 3k and you'll be ok. Other then that, its kind of at up to you.

I'll adjust mine from anywhere from 3k - 3.8k depending on the track.

 

I would do around 3500 rpm and about 100-200 rpm before the limiter.

 

3000 rpm is widely regarded to be the minimum and most people take it to 100 - 200 rpm off your shift rpm.

Personally, I was more conservative with my progressive controller setup -- 3300 rpm = 75rwhp shot that ramps up in a straight line to a 100rwhp shot by 4000 rpm and it shuts down at 6300 rpm. My shift light hits at 6400 and I'm usually banging it right around there.

 

3500-6800RPM in my SBE car.