Axial Wraith and Odonnell Z01B
08-16-2012, 05:25 PM
#1
Staging Lane
Thread Starter
Join Date: May 2012
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Axial Wraith and Odonnell Z01B I am downsizing in my R/C so I am looking to get rid of a few of them. I have an Axial Wraith with the following
Vanquish Titanium four link
Vanquish Titanium drag link and Tie rod
Vanquish Incision Chubs
Robinson Racing 32 pitch gears. I believe its 18 Pinion 36 Spur But not sure. Its geared more towards a crawler
Hitec HS-7985 MG Coreless digital steering servo
RC4WD Limited Edition aluminum beadlock wheels with RC4WD Rock Crusher H/T 2.2 tires with foams mounted to em. I also have the stock wheels and tires.
The truck would need a battery and radio system to be operable.
Asking 350.00 Obo
Next is an Odonnell Z01B 1/8th scale Nitro Buggy
LRP ZR.21X with about 3 gallons through it...Still has good compression.
Jammin JP-4 pipe
AKA dish wheels with AKA I-beam tires mounted to them.
To run the car would need a new clutch which is about 30-40 dollars, a steering servo, throttle servo, reciever pack, radio system and of course fuel.
The car also comes with other misc parts that came in the kit.
I am willing to take a hit on this one since i went from 8th scale buggy to short course racing.
Asking 300 Obo
I would also be willing to trade for LS1 stuff. Im in need of a new catback. Looking for headers duals y pipe etc. Basically anything performance wise. It would be for a 02 Z
Vanquish Titanium four link
Vanquish Titanium drag link and Tie rod
Vanquish Incision Chubs
Robinson Racing 32 pitch gears. I believe its 18 Pinion 36 Spur But not sure. Its geared more towards a crawler
Hitec HS-7985 MG Coreless digital steering servo
RC4WD Limited Edition aluminum beadlock wheels with RC4WD Rock Crusher H/T 2.2 tires with foams mounted to em. I also have the stock wheels and tires.
The truck would need a battery and radio system to be operable.
Asking 350.00 Obo
Next is an Odonnell Z01B 1/8th scale Nitro Buggy
LRP ZR.21X with about 3 gallons through it...Still has good compression.
Jammin JP-4 pipe
AKA dish wheels with AKA I-beam tires mounted to them.
To run the car would need a new clutch which is about 30-40 dollars, a steering servo, throttle servo, reciever pack, radio system and of course fuel.
The car also comes with other misc parts that came in the kit.
I am willing to take a hit on this one since i went from 8th scale buggy to short course racing.
Asking 300 Obo
I would also be willing to trade for LS1 stuff. Im in need of a new catback. Looking for headers duals y pipe etc. Basically anything performance wise. It would be for a 02 Z
Last edited by 450xguy; 08-22-2012 at 08:19 PM.
