Turn Key solid roller 383!!!
10-13-2008, 09:16 PM
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Dec 2002
Location: Gatesville, TX
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Turn Key solid roller 383!!! Parts list is:
Eagle 3.75 crank
Eagle 6.00 rods
JE pistons
Miledon oil pan (67 nova) pass dipstick
Miledon oil pump and bolt in screen
Comp solid roller cam 252/264 on a 113 lsa with .600/.630 lift @ 1.5 rocker ratio
Comp solid roller lifters
Comp chromemoly one piece pushrods
Victor Jr aluminum heads C&C ported 2.08in/1.65ex valves
Scorpion 1.5/1.6 roller rockers
Victor Jr intake with 4500 series flange
Holley 4500/4150 adaptor
Holley 750 cfm double pumper carb
MSD billet distributer
Mallory Hifire ign box
Taylor plug wires
MSD coil
Proform electric water pump
Motor is on an engine stand custom with radiator built to crank up for the buyer. Motor is in Whitney TX at a friend's shop. What you see in the pics is what you get: Carb to oil pan and flywheel to water pump.
The headers do NOT go with the motor. They were mounted upside down because of the angle plugs.
Over $8,500 invested.
Asking $4,500 to move it quickly. This is a steal! Please call me at 254-216-3412 for more info or interest.
Thanks,
Sean
Eagle 3.75 crank
Eagle 6.00 rods
JE pistons
Miledon oil pan (67 nova) pass dipstick
Miledon oil pump and bolt in screen
Comp solid roller cam 252/264 on a 113 lsa with .600/.630 lift @ 1.5 rocker ratio
Comp solid roller lifters
Comp chromemoly one piece pushrods
Victor Jr aluminum heads C&C ported 2.08in/1.65ex valves
Scorpion 1.5/1.6 roller rockers
Victor Jr intake with 4500 series flange
Holley 4500/4150 adaptor
Holley 750 cfm double pumper carb
MSD billet distributer
Mallory Hifire ign box
Taylor plug wires
MSD coil
Proform electric water pump
Motor is on an engine stand custom with radiator built to crank up for the buyer. Motor is in Whitney TX at a friend's shop. What you see in the pics is what you get: Carb to oil pan and flywheel to water pump.
The headers do NOT go with the motor. They were mounted upside down because of the angle plugs.
Over $8,500 invested.
Asking $4,500 to move it quickly. This is a steal! Please call me at 254-216-3412 for more info or interest.
Thanks,
Sean
Last edited by Gustin; 10-13-2008 at 09:23 PM.
