Trick Flow Chromemoly Pushrods - 7.150" length
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a set of 16 pushrods for sale as described below. I ran them in my LS1 for 10K miles but they are too short for my new setup. Perfect condition, $45 shipped. I am advertising them in this section as I believe this length is used more the the SBC rather than the Gen III motor.
Thanks for looking![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
Trick Flow® Chromemoly Pushrods
Get all you can from your engine.
Get all of the performance your engine can produce with these durable pushrods designed especially for high-lift cams. Trick Flow® pushrods are available in both 5/16 in. and 3/8 in. diameters. They feature .080 in. wall thickness and are formed from 4130 chromemoly steel. These one-piece Trick Flow® pushrods are heat-treated for use with guideplates. They close their tips, and then the oil holes are drilled and chamfered to .093 in. to prevent stress fractures and cracks.
Part Number: TFS-21407150
For Use with Guideplates: Yes
Tubing Diameter (in): 5/16 in.
Pushrod Material: Chromemoly
Top Tip Style: Ball
Bottom Tip Style: Ball
Intake Overall Length (in): 7.150 in.
Exhaust Overall Length (in): 7.150 in.
Quantity: Sold as a set of 16.
One Piece Pushrod: Yes
Oiling: Yes
Tapered: No
Tip Attachment: Formed
Top Tip Diameter: 5/16 in.
Bottom Tip Diameter: 5/16 in.
Wall Thickness (in): 0.080 in.
Heat-Treated: Yes
Pushrods, Chromemoly, Heat-Treated, 5/16 in. Diameter, 7.150 in. Length, Universal, Set of 16
Thanks for looking
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
Trick Flow® Chromemoly Pushrods
Get all you can from your engine.
Get all of the performance your engine can produce with these durable pushrods designed especially for high-lift cams. Trick Flow® pushrods are available in both 5/16 in. and 3/8 in. diameters. They feature .080 in. wall thickness and are formed from 4130 chromemoly steel. These one-piece Trick Flow® pushrods are heat-treated for use with guideplates. They close their tips, and then the oil holes are drilled and chamfered to .093 in. to prevent stress fractures and cracks.
Part Number: TFS-21407150
For Use with Guideplates: Yes
Tubing Diameter (in): 5/16 in.
Pushrod Material: Chromemoly
Top Tip Style: Ball
Bottom Tip Style: Ball
Intake Overall Length (in): 7.150 in.
Exhaust Overall Length (in): 7.150 in.
Quantity: Sold as a set of 16.
One Piece Pushrod: Yes
Oiling: Yes
Tapered: No
Tip Attachment: Formed
Top Tip Diameter: 5/16 in.
Bottom Tip Diameter: 5/16 in.
Wall Thickness (in): 0.080 in.
Heat-Treated: Yes
Pushrods, Chromemoly, Heat-Treated, 5/16 in. Diameter, 7.150 in. Length, Universal, Set of 16