Part out/shop clean out LOTS of stuff
12-02-2008, 12:26 PM
#1
Part out/shop clean out LOTS of stuff Garage clean out /part out, Building a race car, plus a bunch of left overs from past combo's, I want this stuff gone, make me an offer, some stuff I am firm on some stuff I am not.
LT1 Cloyes double roller timing set, ~500 miles, must have electric W/P $40
LT1 comp cam, 236/242 .56?/ .57? lift. ~500 miles $150 I should be able to find cam card
Eagle 6" SIR Rods, ARP bolts ~500 miles $100
LT1 95-97 timing set, Melling brand ~1000 miles $50
Eagle 5.7 H beam rods, L19 bolts $550 new, $250
JE/SRP 31cc dish forged pistons, for 3.75 stroke, (383) and 4.030 bore (.030 over) one piston has a nick on the bottom side of the piston, no serious damage $250
LT1 block, .030 over, ARP studded mains, line boar has been checked, was bored in a block true fixture, Decks squared and at 9.00 had about 500 miles on it. Wash it up and assemble it. $300
Professinal products Steel Keyed hub, Comes with hardware. $50
I also have 2 T56's one LT1 style and one LSX style, both rebuilt, updated fresh NO miles on them, $1500 B/O I also have theone set of swap parts, pedle assembly, LSX throw out, LSX flywheel etc. Also LT flywheel and stock clutch.....
3.73 gears for a 3 series 10 bolt, NEW $150
The rest is MISC, I dont know what the stuff is worth so its all make me an offer..
LT1 (94-95) wiring harness, I also have a OBDI computer, computer bracket etc.....
ABS unit from a 94-95 car, master Cly, brake booster etc...
LT1 engine acc bracket, P/S pump, a/c compresser and bracket...
Interior parts, heater controls, air bags, BCM, interior wiring harness, dash harness etc....
I'm sure I am missing some things, I will keep an eye on this thread and try to keep it updated, otherwise you can call/text me at 651-226-8636
LT1 Cloyes double roller timing set, ~500 miles, must have electric W/P $40
LT1 comp cam, 236/242 .56?/ .57? lift. ~500 miles $150 I should be able to find cam card
Eagle 6" SIR Rods, ARP bolts ~500 miles $100
LT1 95-97 timing set, Melling brand ~1000 miles $50
Eagle 5.7 H beam rods, L19 bolts $550 new, $250
JE/SRP 31cc dish forged pistons, for 3.75 stroke, (383) and 4.030 bore (.030 over) one piston has a nick on the bottom side of the piston, no serious damage $250
LT1 block, .030 over, ARP studded mains, line boar has been checked, was bored in a block true fixture, Decks squared and at 9.00 had about 500 miles on it. Wash it up and assemble it. $300
Professinal products Steel Keyed hub, Comes with hardware. $50
I also have 2 T56's one LT1 style and one LSX style, both rebuilt, updated fresh NO miles on them, $1500 B/O I also have theone set of swap parts, pedle assembly, LSX throw out, LSX flywheel etc. Also LT flywheel and stock clutch.....
3.73 gears for a 3 series 10 bolt, NEW $150
The rest is MISC, I dont know what the stuff is worth so its all make me an offer..
LT1 (94-95) wiring harness, I also have a OBDI computer, computer bracket etc.....
ABS unit from a 94-95 car, master Cly, brake booster etc...
LT1 engine acc bracket, P/S pump, a/c compresser and bracket...
Interior parts, heater controls, air bags, BCM, interior wiring harness, dash harness etc....
I'm sure I am missing some things, I will keep an eye on this thread and try to keep it updated, otherwise you can call/text me at 651-226-8636
