LTCC w/ coils, wires, mounts
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: Colorado Springs
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have have a complete LTCC coil conversion for a LT1. It comes with 8 new AC Delco coils and and Taylor plug wires with fire sleeve. I also made a set of coil mounts that mount the coils on the valve covers.
The system works great and only has about 10 pulls on the dyno. I took it off because I was having problems with my opti spark at 20lbs of boost and 7000 rpm. I went with a stand alone ignition from electromotive.
This system would be great on any NA car or boosted with less than 15 lbs and 6500 rpm.
I am asking 700.00 OBO let me know.
The system works great and only has about 10 pulls on the dyno. I took it off because I was having problems with my opti spark at 20lbs of boost and 7000 rpm. I went with a stand alone ignition from electromotive.
This system would be great on any NA car or boosted with less than 15 lbs and 6500 rpm.
I am asking 700.00 OBO let me know.
#3
Launching!
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Location: Colorado Springs
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have been searching and realized my price is too high. I will do 500 shipped. I would like to see it used instead of sitting on a shelf. I have over 1000.00 invested in this.