Magnaflow tips
01-14-2009, 06:08 PM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Mar 2008
Location: NW Florida
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Magnaflow tips I've got a set of Magnaflow tips that I don't plan on using, they are actually the pipes cut at the muffler weld all the way out to the tips. They are in good condition, I didn't notice any scratches.
If someone is interested I'll take some pics and post them...
$40 Shipped!
If someone is interested I'll take some pics and post them...
$40 Shipped!
Last edited by toy96ta; 02-13-2009 at 09:25 AM. Reason: new price
01-14-2009, 07:04 PM
#3
01-14-2009, 09:32 PM
#4
On The Tree
Thread Starter
iTrader: (5)
Join Date: Mar 2008
Location: NW Florida
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
I'm located outside of Boston.
Here are a couple pics of the tips. Upon close inspection I realized there are some scrapes on the top side of the driver's side tip, and some small ones on the bottom of both. I don't think either will be visible when these are mounted. The sides look fine, so they will pass the 5' inspection just fine. I think some mothers would clean up the scrapes pretty well (as well as the tiny rust flecks on the bottom side of the passenger side.)
Here are a couple pics of the tips. Upon close inspection I realized there are some scrapes on the top side of the driver's side tip, and some small ones on the bottom of both. I don't think either will be visible when these are mounted. The sides look fine, so they will pass the 5' inspection just fine. I think some mothers would clean up the scrapes pretty well (as well as the tiny rust flecks on the bottom side of the passenger side.)
