LT1 Top end parts and valvetrain
01-18-2009, 10:23 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: May 2007
Location: DFW, Tx
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
LT1 parts suspension, prokit, ac, ps, acc bracket, etc. LIST UPDATED 07/24
These are 96 model casting heads and stock intake. There is no port work done to either. The heads have upgraded double valve springs from comp.
Comp chromoly pushrods: 7.200 Part#7940 SOLD
Comp pro magnum 1.6 stud mount roller rockers: SOLD
Front Struts (less than a year old) with Prokit springs on them (direct bolt-in): $150
Complete stock front spindles with brakes, lines, rotors, calipers etc. still attached (lots of brake pad left): $100
LT1 '96 castings with comp double valve springs, no porting done. Perfect working condition: $150 SOLD
March underdrive crank and alt pulley: $45 (SOLD)
Stock intake w/ stock injectors, fuel rails, stock reg: $75 shipped (SOLD)
Chrome centerbolt valve covers with bolts and rubber gaskets: $60 shipped
Got lifters, pushrods, oil pump gear drive, etc...anything else you see just make an offer.
Stock LCAs $15
Stock PHB $8
Stock TA $20
Stock Torque Convertor (about 10k mi on it) $45
Stock Flexplate $15
TCI neutral balanced flexplate (for an internal balanced assembly) $45 SOLD
Callies Splayed mains Part# CCMC-111 (no bolts) - $60 SOLD
LT1 KM $8 (Or will include it with the pcm)
Stock upper and lower a-arms (includes ball joints) $45obo per side
Stock Springs - Front and rears - $50
Stock PS rack, lines, pump $75obo
AC Compressor and attached lines - $50
Stock Accessory bracket: $35
Stock TB with all sensors - $30
Stock motor mounts attached to the frame mounts, still in good shape - $30
Stock yellow 93-97 corner lights (not sure if they fit an LS1 front end): $20
These are 96 model casting heads and stock intake. There is no port work done to either. The heads have upgraded double valve springs from comp.
Comp chromoly pushrods: 7.200 Part#7940 SOLD
Comp pro magnum 1.6 stud mount roller rockers: SOLD
Front Struts (less than a year old) with Prokit springs on them (direct bolt-in): $150
Complete stock front spindles with brakes, lines, rotors, calipers etc. still attached (lots of brake pad left): $100
LT1 '96 castings with comp double valve springs, no porting done. Perfect working condition: $150 SOLD
March underdrive crank and alt pulley: $45 (SOLD)
Stock intake w/ stock injectors, fuel rails, stock reg: $75 shipped (SOLD)
Chrome centerbolt valve covers with bolts and rubber gaskets: $60 shipped
Got lifters, pushrods, oil pump gear drive, etc...anything else you see just make an offer.
Stock LCAs $15
Stock PHB $8
Stock TA $20
Stock Torque Convertor (about 10k mi on it) $45
Stock Flexplate $15
TCI neutral balanced flexplate (for an internal balanced assembly) $45 SOLD
Callies Splayed mains Part# CCMC-111 (no bolts) - $60 SOLD
LT1 KM $8 (Or will include it with the pcm)
Stock upper and lower a-arms (includes ball joints) $45obo per side
Stock Springs - Front and rears - $50
Stock PS rack, lines, pump $75obo
AC Compressor and attached lines - $50
Stock Accessory bracket: $35
Stock TB with all sensors - $30
Stock motor mounts attached to the frame mounts, still in good shape - $30
Stock yellow 93-97 corner lights (not sure if they fit an LS1 front end): $20
Last edited by Stroked96Bowtie; 07-24-2009 at 02:10 PM.
01-18-2009, 06:04 PM
#5
Staging Lane
iTrader: (2)
Join Date: Jan 2009
Location: Crowley, Tx
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
self align? i thought the roller rockers for LT1 had to be self align rockers. the ones you have dont apear to be self align but if they are and the stud size is 3/8, ill take them for sure
Trending Topics
01-19-2009, 11:07 AM
#8
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: May 2007
Location: DFW, Tx
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
Was able to sell the RR, guideplates, studs, and pushrods locally.
Let me know if there is something else there you guys need. Would like to get rid of the heads and intake.
Let me know if there is something else there you guys need. Would like to get rid of the heads and intake.
