SBC solid roller 383 For Sale!!...
02-12-2009, 04:11 PM
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Dec 2002
Location: Gatesville, TX
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
SBC solid roller 383 For Sale!!... Priced to move!
Parts list is:
Eagle 3.75 crank
Eagle 6.00 H beam rods
JE pistons (12.1:1 compression)
Miledon oil pan (67 nova) pass dipstick
Miledon oil pump and bolt in screen
Comp solid roller cam 252/264 on a 113 lsa with .600/.630 lift @ 1.5 rocker ratio
Comp solid roller lifters
Comp chromemoly one piece pushrods
Victor Jr aluminum heads C&C ported 2.08in/1.65ex valves
Scorpion 1.5/1.6 roller rockers
Victor Jr intake with 4500 series flange
Holley 4500/4150 adaptor
Holley 750 cfm double pumper carb
MSD billet distributer
Mallory Hifire ign box
Taylor plug wires
MSD coil
Proform electric water pump
Motor is on a custom engine stand with radiator built to crank up for the buyer. Motor is in Gatesville Texas inside my shop. What you see in the pics is what you get: Carb to oil pan and flywheel to water pump.
The headers do NOT go with the motor. They were mounted upside down because of the angle plugs.
Over $9,000 invested.
$4,000 to move it quickly. This is a steal! Please call me at 254-216-3412 for more info or interest.
Thanks,
Sean
Parts list is:
Eagle 3.75 crank
Eagle 6.00 H beam rods
JE pistons (12.1:1 compression)
Miledon oil pan (67 nova) pass dipstick
Miledon oil pump and bolt in screen
Comp solid roller cam 252/264 on a 113 lsa with .600/.630 lift @ 1.5 rocker ratio
Comp solid roller lifters
Comp chromemoly one piece pushrods
Victor Jr aluminum heads C&C ported 2.08in/1.65ex valves
Scorpion 1.5/1.6 roller rockers
Victor Jr intake with 4500 series flange
Holley 4500/4150 adaptor
Holley 750 cfm double pumper carb
MSD billet distributer
Mallory Hifire ign box
Taylor plug wires
MSD coil
Proform electric water pump
Motor is on a custom engine stand with radiator built to crank up for the buyer. Motor is in Gatesville Texas inside my shop. What you see in the pics is what you get: Carb to oil pan and flywheel to water pump.
The headers do NOT go with the motor. They were mounted upside down because of the angle plugs.
Over $9,000 invested.
$4,000 to move it quickly. This is a steal! Please call me at 254-216-3412 for more info or interest.
Thanks,
Sean
