LT1 T-56 - Rebuilt to 800hp Viper spec
03-02-2009, 07:53 AM
#1
LT1 T-56 - Rebuilt to 800hp Viper spec SOLD
A 1995 LT1 core unit.
Viper 30-spline mainshaft, machined to Fbody length.
Fbody tailhousing, bored/sleeved for larger viper output shaft.
Rebuilt to 800+ hp/lb-ft TQ rating
MM6 gear ratios
Carbon-fiber synchro blockers on all gears.
Carbon-fiber synchro on REVERSE (No more bronze grinding)
Steel 3/4 shift fork.
Upgraded viper-spec 2nd gear.
Billet synchro keys on 1/2, 3/4, 5/6 synchros, new OEM keys on Rev.
Bronze shift fork pads on all (1/2, 3/4, 5/6, Rev) shift forks
Performance shimming on mainshaft and countershaft.
Brand new 30-spline viper yoke to 1350 u-joint, included.
Rebuild fully photo-documented. Pictures sent upon request.
Includes LT1 Bellhousing, clutch fork, and slave spacer.
$2200 + PP fees + S/H (Averages about $130) or meet within 100mi of 19711.
A 1995 LT1 core unit.
Viper 30-spline mainshaft, machined to Fbody length.
Fbody tailhousing, bored/sleeved for larger viper output shaft.
Rebuilt to 800+ hp/lb-ft TQ rating
MM6 gear ratios
Carbon-fiber synchro blockers on all gears.
Carbon-fiber synchro on REVERSE (No more bronze grinding)
Steel 3/4 shift fork.
Upgraded viper-spec 2nd gear.
Billet synchro keys on 1/2, 3/4, 5/6 synchros, new OEM keys on Rev.
Bronze shift fork pads on all (1/2, 3/4, 5/6, Rev) shift forks
Performance shimming on mainshaft and countershaft.
Brand new 30-spline viper yoke to 1350 u-joint, included.
Rebuild fully photo-documented. Pictures sent upon request.
Includes LT1 Bellhousing, clutch fork, and slave spacer.
$2200 + PP fees + S/H (Averages about $130) or meet within 100mi of 19711.
Last edited by 85MikeTPI; 05-28-2009 at 08:14 PM.
