Milodon Windage Tray Relo Studs
03-21-2009 | 02:56 AM
#1
Thread Starter
Joined: Jul 2004
Posts: 2,965
Likes: 6
From: Palm Harbor, FL
Milodon Windage Tray Relo Studs I have 3 of the studs brand new left from my Milodon Windage Tray Relo bolt kit (part# 81150). The kit comes with 6 but only 3 are required. This kit allows you to lower the windage tray to clearance for a large stroke crank.
the kit retails for $49.99 + Shipping, I'm looking for $25 Shipped
PM for quickest response
Originally Posted by Summit Racing
Mount your windage tray the right way.
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting-position feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued).
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting-position feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued).
PM for quickest response
